Attached
To fulfill the growing global energy demand, harvesting energy directly from the
sunlight, using solar cells, is considered as one of the best methods available. Conjugated
polymers have significant influence in changing the perception of solar cell materials due to
low cost and manufacturing simplicity compared to conventional Si-based solar cells. It has
been shown that the inorganic polymers can be replaced by organic conjugated polymers to
construct the organic solar cells.
Polythiophene with both doped and undoped states, are one of the major categories
of conjugated polymers used in organic solar cell applications. Starting materials of
polythiophenes are commonly obtained from nonrenewable sources such as petroleum
byproducts and their price may vary with the crude oil price. Green thiophene derivatives
are reported in roots of Tagetes sp. The current study discusses electropolymerization of
polythiophenes from hexane soluble fraction (HSF) of partially purified roots extract of
thiophene derivatives from the Tagetes erecta.
In literature, several thiophene derivatives were identified in the root extracts of
Tagetes erecta including 5-(3-buten-l-ynyl)-2,2-bithienyl, 5-(4-hydroxy-l-butynyl)-2,2-
bithienyl, 5-(4-acetoxy-l-butynyl)-2,2-bithienyl and 2,2:5,2-terthienyl (terthiophene). In
this work, crude extract of Tagetes erecta was partially purified and partitioned into hexane.
Partitioning of thiophene derivatives into hexane was confirmed by GCMS studies.
According to GCMS data, terthiophene is the only possible compound in HSF that
can undergo electropolymerization. Cyclic voltammetric study was carried out to
characterize die redox potential of terthiophenes in HSF and oxidation of terthiophenes was
observed at 1.05 V. Electropolymerization of terthiophenes was carried out in acetonitrile
medium under inert environment and LiC104 was used as the electrolyte. During the
electropolymerization, a thin layer was formed on the anode surface.
Electropolymerized products from HSF were characterized using FTIR, UVVisible Spectroscopy and powder X-ray diffraction techniques and those were compared
with the results of the electropolymerized product of pure thiophene monomers. These
results further confirmed the possibility of electropolymerization of terthiophenes from the
HSF of Tagetes erecta, to obtain highly crystalline polythiophenes.
